You need to troubleshoot to know the rationale why the error message Epson printer in error state is displayed. There are often various reasons for it. In such scenarios, search the issues given below. you'll fix them with the respective solutions.
1. See whether all the wires getting to a wireless printer like routers and wireless are tight. If not, remove and tighten them up.
2. Dust particles may have moved into the printer or settled on the wires connection. this will also cause errors. Clean with the special solution made for these purposes.
After getting the proper information about the reasons, you should begin with the rectification of the Epson Printer in Error State. For that you need to carefully implement the below-mentioned steps and fix the same errors from the root:
Step 1: Mend Hardware (Power Cord) Hiccups:
First of all, disconnect the power cord from the electrical board and USB capable from your PC and Printer too.
Furthermore, reconnect the USB cable is to the computer and Epson Printer again.
Plug-in the power cord to the power supply. Note: Change the capable if there is an issue with the same.
In case, you are making use of wireless printer then you should make sure the wireless network is stable.
Once done with all the parameters, you should begin with printing a paper from your printer for testing purposes.
Step 2: Replace Older Version of Printer Drivers with Updated One:
First of all, you need to type ‘Device Manager’ in the search box and click the ‘Device Manager’ option.
From the available list, you should locate your printer and right-click the printer to go to the ‘Properties’ option.
Hereafter, you should reach out to the ‘Driver’ and opt for the ‘Update Driver’ option which starts updating the driver. Moreover, you can also choose to search for updated driver automatically.
Lastly, restart your computer and Epson printer.
After that, print a page for testing purposes and check if drivers are updated successfully.
Step 3: Restart Your PC and Epson Printer:
On your first step, turn off your printer and make you have closed all the active sessions of printing tasks
Moving to the next step will ask you to terminate the printer jobs which are already in the queue.
On the last step, give a restart your computer system and device.
See if the Epson Printer in Error State problem is resolved.
Regards,
Rachel Gomez